One of the main draws for the Starbuzz Wireless Shisha is its ease of use and terrific flavor production. We are here to show you just how easy it is to get your Wireless Shisha up and running in no time. Your first actual step when you receive the device is to go ahead and put it on the charger and let it charge until the light at the bottom of the hose turns green. Once it's green, you know it's ready to go.
For all intents and purposes of this blog tutorial, we are assuming your device is already fully charged and ready for action. Below is a breakdown of the Wireless Shisha parts we'll be discussing.
Wireless Shisha Set Up
When you are removing the Wireless Shisha from its packaging, go ahead and remove all the pieces highlighted above. Since we are assuming your device is charged and ready to go, you won't need the charger. Note that the piece labeled "top cap/grommet" will come screwed onto the top of the Wireless Shisha, so you'll want to unscrew that piece and remove it completely. You'll also need to remove the rubber grommet from the inside of that top piece as well. Do not throw that grommet away.
Step 1: Remove all the grommets - We have already removed the large rubber grommet from the top cap of the hose. When you pull the cartridges out of the box, they should come with rubber stoppers on either end of them. These absolutely must be removed, or you could end up vaping silicon rubber, which has never been a terribly popular Starbuzz flavor. Also, as a side note, your Wireless Shisha will come with 2 cartridges of Blue Mist, but they do make other flavors in cartridges and you can buy nearly any flavor made by Starbuzz on our site.
Step 2: Assembling the Mouth Piece - Attaching the mouth piece is simple, since we already have the grommet removed from the top cap, all you do is put the mouth piece through the top cap and screw it on tightly. Don't screw it too tightly, though, or you'll risk stripping the threads on the mouth piece. Once we have that piece screwed into place, our last step here is to put the rubber grommet piece back in the top cap. Now our mouth piece is ready to rock.
Step 3: Installing the Cartridges - Before we put the cap back on the hose, we do need to install the flavor cartridges. If you look down into the open end of the Wireless Shsiha, you can see that there are two small slots reserved for two small Starbuzz Flavor Cartridges. Simply slide the cartridges down into those little slots and screw them in clockwise until they fit nice and snugly in the device. Now we are ready to put our mouthpiece back onto the device. The two rubber pieces extending from the grommet should slide easily between your two flavor cartridges, and once it's all screwed together, the grommet will create a perfect seal to avoid air leaks. Just set it on the top of your Wireless Shisha and screw it on clockwise and you're all set.
The great thing about the Wireless Shisha from Starbuzz is the manufacturer's limited warranty they offer. The warranty is valid for 12 months from the purchase date. In the rare event that your Wireless Shisha does not work properly out of the box, suddenly stops working, or just does not work as advertised, you can claim the warranty on this device! Simply call us or chat in for your order invoice, as Starbuzz will request it, and then give them a call at (888) 942-5355 to get it replaced.