Using the Square Ehead is a quite a simple experience. All you have to do is the fill the device with your favorite e-liquid, pop the Ehead on top of your hookah in lieu of an actual hookah bowl, and puff away! It's really that simple, but we're here to elaborate on that process to ensure the process goes just as easy for the novice as it does for the expert.
For starters, your Square Ehead will come with the following:
- Two 8mL E-Liquid Flavor Tanks (with internal heating coils)
- A Wall Charger
- 25 mL Square E-Liquid (Nicotine Free)
- Owner's Manual
Step 1 - Filling the Device
This is a quick process. To fill the Ehead, simply take the large black piece off the top of the Ehead by unscrewing it. For this part, it's a good idea to go ahead and put this piece on the charger so it can charge during setup. From there, just remove the e-liquid tank in the middle of the device, and proceed to unscrew the top off of that as well. This is the piece that will hold your e-liquid. The metal piece in the middle of the flavor tank is known as the heating coil. You can buy replacement heating coils here. The e-liquid tanks hold up to 8 mL of the e-juice of your choice.
Remember that when you are filling these tanks, do not pour any liquid onto the top of the center heating unit. It's recommend that you tilt the tank slightly and fill it up to avoid getting e-liquid on that spire. Once you have a sufficient amount of e-liquid inside the tank, screw the cap back on the top and place it back in the device. Unplug the large black topcap and screw the device back together and you're ready to go. You simply place the Ehead on top of your regular hookah to turn it into an electronic vaporizer.
Step 2 - Activating and Adjusting Heat
Now that we have our Square Ehead set up with our favorite flavor of e-liquid, it's time to activate it. Do not be alarmed when you see no "On/Off" button because, lo, there is none! That's right, once your Ehead is in place and you inhale, it automatically activates itself. Conversely, it will deactivate itself when not in use. You can also use the plus and minus symbols to activate it.
Those same plus and minus symbols can be used to adjust the voltage, increasing or decreasing the amount of heat exposure you want to apply to the e-juice in the flavor tank. The more heat you apply, obviously the hotter your smoke will be but also this will have an effect on the size of clouds of vapor you'll be able to produce.
Once your settings are to your liking, smoke away!
Step 3 - Cleaning and Maintenance
You'll want to clean your device after every use to keep it in pristine shape. To clean it, just disassemble the device again and break down the individual pieces, including the flavor tank. Remove any remaining liquid from the tank before proceeding. Once the tank is completely empty, remove the top piece from the flavor tank as well as the heating coil from the center of the tank. Again, do not get the top part of the heating coil wet or it will no longer work. Take a paper towel or Q-Tip and clean the remaining e-juice off the sides of the glass tank. It's also a good idea to clean off the center heating unit around the edges so no sticky e-liquid remains on it, as this could cause that particular flavor to carry over into your next session.
Other than cleaning the Ehead regularly, the only other maintenance to be regularly performed would be to keep rotating functional flavor tanks (also known as clearomizer) and heating coils in the device to ensure that it is running properly.